This issue is often caused by misaligned safety sensors, obstructions in the door’s path, or damaged rollers or tracks. The sensors near the bottom of the door must be properly aligned and free of debris. If they’re blinking or not lit, they may need adjustment. In some cases, it could also be due to worn-out cables, limit switch settings, or an issue with the opener itself.

Professional Tip: Don’t force the door closed — it could worsen the damage. Schedule an inspection to avoid safety risks.

Garage door springs break due to wear and tear over time — they’re rated for a limited number of cycles (open/close actions), typically around 10,000. Other causes include:

• Rust or corrosion
  

• Poor maintenance/lack of lubrication
  

• Extreme temperature fluctuations
  

If you hear a loud "bang" and the door becomes heavy or uneven, it’s likely a broken spring. Do not attempt DIY repairs — springs are under high tension and can cause injury

Look for these signs:

• Inconsistent or sluggish door movement
  

• Loud grinding or humming noises
  

• Opener only works intermittently or not at all
  

• Lack of response from wall button or remote
  

• Unit is over 10–15 years old
  

New openers come with Wi-Fi smart features, backup batteries, and improved safety sensors — a worthwhile upgrade for many Florida homeowners.

Yes, but proceed with caution. Here’s a quick DIY method:

1. Locate the LED lights on both sensors (bottom of the tracks).
   

2. Loosen the brackets and gently adjust until both lights are solid.
   

3. Make sure sensors are facing each other and positioned at equal height.
   

4. Clean off any dirt or cobwebs.
   

If realignment doesn’t work, or if the lights won’t turn solid, there could be a wiring or hardware issue that needs professional attention

Squeaking, grinding, or banging noises usually mean it’s time for a tune-up or repair. Common causes include:

• Dry or rusted rollers
  

• Loose hardware (hinges, nuts, brackets)
  

• Worn bearings or springs
  

• Misaligned tracks
  

Lubricating moving parts with garage-specific lubricant can help temporarily. For ongoing noise or vibration, schedule a garage door tune-up to prevent bigger problems.